A universal enclosure built with the application and operator in mind

AirClean Systems Type C PowderSafe™ balance enclosure incorporates the user-friendly features and chemical fume containment capabilities of the ductless fume hood with airflow dynamics and HEPASafe™ features of the PowderSafe Type B. Thermally fused polypropylene makes the PowderSafe Type C enclosure perfect for powder or solvent weighing, manipulation and enclosing weighing equipment. Fitted with the AirSafe™ automatic safety controller, the Type C PowderSafe has an even laminar flow airstream for accurate weighing.

The entire rear wall of the enclosure is a filtration zone; a clean sweep of all particulate and gases is achieved. This design feature makes the Type C PowderSafe ideal when weighing the lightest powders or the heaviest solvents.

AirClean Systems HEPASafe filter change-out technology, incorporated into each PowderSafe Type C Powder Enclosure, allows the operator to safely and effectively change both the pre-filter and primary HEPA filter. Standard on each Type C enclosure is the AirSafe Automatic Safety Controller. The face velocity on the PowderSafe Type C Enclosures, as preset by the operator, is constantly monitored and maintained by the AirSafe™ Automatic Safety Controller. AirSafe™ monitors the condition of both HEPA filters and provides audible and visible alarms when filter change out is necessary.

Standard Features:

• Horizontal laminar airflow pattern
• AirSafe™ automatic safety controller
• Permanent backup HEPA filter
• Effectively weigh to 7 decimal places
• Integral vapor-proof fluorescent lighting
• No ductwork required
• No installation required - plugs directly into a standard 110V or 220V electrical outlet
• Polypropylene construction for chemical resistance. The result: NO RUST
• Constant monitoring of fume hood face velocity with variable airflow control to user preset value
• Gas phase bonded carbon filtration
• Lab event timer

Safety Features:

• HEPASafe™ technology allows safe HEPA filter change while enclosure is operational
• ASHRAE 110 tested
• Brushless, sparkless blower is post-filter
• Deep base effectively contains accidental spills
• Electronic gas detection for real-time gas phase filter monitoring
• Exhaust air is HEPA filtered, keeping any potential particulate from returning to the room
• Filter and electronics are located above the workspace, eliminating the chance of a chemical spill entering these sensitive areas
• Filter safety lockout to ensure correct filter replacement
• Low airflow alarm warns the user both visually and audibly
• Real time monitoring of installed filtration bed
• Shipped fully assembled
• Tested to UL 61010-1 and CSA C22.2 No. 61010-1

Options:

• Sturdy cart/trolley with locking casters for mobility
• Hard surface disinfectant

Available sizes:

• 32 inch
• 48 inch