After inserting an enzymatically cleaned and dried TOE probe into the TD 100CE, you simply follow the clear prompts on the display. This takes less than one minute to enter operator and probe details that will be printed on the verification report along with the contact time and average disinfectant temperature after a successful disinfection cycle. The TD 100CE automatically continues the process of high-level disinfection followed by five cold water rinses for a total of 17 minutes of total reprocess time. When comparing that to the labour-intensive manual process for disinfection and rinsing the TD 100CE is extremely efficient and provides a repeatable result. Additionally, the high-level TD-8 disinfectant used in the TD 100CE is single-use and does not require the staff member to perform an MRC test on the solution to confirm efficacy before high-level disinfection. 

The TD 100CE utilizes a dedicated single-use 500ml bottle of disinfectant. The high-level disinfectant container seal is opened inside the machine. The TD 100CE was engineered with an advanced vapour management filtration system that adsorbs and neutralizes vapours released during the high-level disinfection process. Splashes and spills are trapped within the disinfectant reservoir while the fumes are captured by the advanced vapour management system to minimize operator exposure. The TD 100CE uses a fresh bottle of high-level disinfectant each cycle eliminating the need for a health care professional to conduct MRC testing and have the potential of exposure to the high- level disinfectant vapours. The TD 100CE was engineered to provide unsurpassed operator safety from exposure to high-level disinfectant vapours.